Hermetically sealed, compact and durable密封,結構緊湊,結實耐用
Innovative clean housing design protects the new AS-Interface G11 module, even from steam cleaners or pressure washdowns憑借設計新穎的清潔外殼保護,AS - Interface的G11模塊可經受蒸汽清洗或壓力泵洗,
The new AS-Interface G11 field modules from Pepperl+Fuchs offer an innovative clean housing concept in a robust, compact, round design, and are particularly suitable for assembly machines and process automation applications. 倍加福新型AS–i接線的G11現場模塊擁有堅固,緊湊,圓形的清潔外殼設計理念,尤其適合機器組裝和流程自動化應用。
Due to the unique O-ring seal technology, even cleaning processes involving pressure washers and mechanical stress do not affect the performance of the G11 modules. The smooth surfaces and primary gasket reliably prevent dirt from accumulating! 獨特的O型圈密封技術令G11模塊的性能免受清洗工序的巨大壓力的影響。光滑表面和主要襯墊可有效地防止灰塵積聚!
The housing is only 85 mm in diameter and can be mounted with the flat cable aligned in any direction. 外殼直徑僅有85毫米,可用任意方向排列的扁平電纜安裝。
The outputs offer up to 2 A per M12 port, are short-circuit protected, and indicate an overload condition directly at the relevant M12 port. As a result, troubleshooting time at the installation location is minimized. 每個M12通道的輸出電流高達2安培,具有短路保護,和過載保護。因而將安裝故障處理的時間降到最低。
Important features of the AS-Interface G11 module AS –i G11總線型模塊的重要特征
Highest degree of protection IP68/IP69k, no molded components
Impact resistant mounting using two M5 mounting screws
Round, gold-plated contact pins with proven sealing contour
Compatible with the new AS-Interface POWER 24 specifications
IP68/IP69k的最高保護等級,沒有成型部件
耐沖擊安裝,只需兩個M5的安裝螺絲
圓形,鍍金觸針可靠密封
兼容AS –i Power 24的新電源接口
One product concept – four distinct models一個產品的概念 - 四個不同的模式
The G11 module is available in four versions with different types of connection to the AS-Interface network, and input/output configurations. G11模塊有四種不同的連接版本接入AS - Interface的網絡,以及四種輸入/輸出配置。
You reap the benefits! 您受益無窮!
No more troubleshooting!
In the event of a short circuit at the output, not only is the fault information transferred to the gateway and the PLC, but a red LED at the relevant M12 port indicates the presence of the fault.
不再受故障排除煩擾!
輸出端一旦短路,錯誤信息不僅將傳輸到網關和PLC,M12通道的紅色LED也將指示故障。
Maximum protection
The device is mounted via two M5 screws through the base and a central captive stainless steel screw in the top. Durable materials protect the electronics.
最大程度的保護
該設備通過底部兩個M5螺絲安裝,由頂部中央一個不銹鋼螺絲加以鞏固,電子設備受耐磨性材料保護。
Fits into every corner
The compact, round design allows flexible alignment of the flat cable to any position.
處處為家
緊湊,圓形設計,令扁平電纜線靈活安裝于任何位置。
Steam cleaning or pressure washdown never pose a problem
Radial O-ring seals provide hermetic protection of the electronics without requiring molded components. Aging and thermal stresses are not a concern.
壓力蒸汽清洗或沖洗不構成問題
無需他件,徑向O形圈提供電子元件最佳的密封保護。老化與熱應力不成為問題。
Flat cable with secure sealed contacts
When the flat cable is connected, the sealing contour in the AS-Interface passive splitter effectively seals off the round gold-plated terminal pins.
安全密封的扁平電纜連接
扁平電纜連接時,AS - i被動分配器的密封線能有效密封端口的圓形鍍金引腳。
A clean housing design
Additional primary gasket prevents particles from entering and dirt from accumulating.
清潔外殼設計
額外墊圈防止外物進入、灰塵堆積。
Flexible flat cable routing
The M12 connection for AS-i/AUX allows the G11 module to be used in round cable applications or connected to the AS-Interface flat cable using a flat-to-round cable adapter.
扁平電纜靈活布線
AS-i/AUX的M12利用電纜適配器,使G11模塊可通用于圓形和扁平電纜的應用中。
Operated with standard 24 V per supply
The G11 module already conforms to the new AS-Interface POWER 24 specifications.
操作標準為24伏供電
G11模塊已經符合新的AS –i Power 24規格的電源接口。